Menu

Product image

Fluke i30s AC/DC Akım Pensi

Fiyatı: 56.478,34 TL KDV Dahil
İndirimli Fiyatı:   50.774,03 TL KDV Dahil

SKU:



Derecelendirme 0,00. Toplam oy 0.
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.

The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

 

Electrical specifications
Specified current range
  30 mA to 30A dc, 30 mA to 20 A ac rms
Usable current range
  5 mA to 30 A dc, 30 mA to 20 A ac rms
Crest Factor
  1.4"
Output sensitivity
  100 mV/A
Accuracy (at +25 °C)
  ± 1 % of reading ± 2 mA
Resolution
  ± 1 mA
Load impedance
  > 100 kΩ
Conductor position sensitivity
  ± 1 % relative to center reading
Frequency range
  DC to 100 kHz (- 0.5 dB)
Phase shift below 1 kHz
  < 2 degrees
Temperature coefficient
  ± 0.01 % of reading/°C
Power supply
  9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)
  300 V ac rms or dc

 

General specifications
Maximum conductor size
  19 mm diameter
Output connection
  Safety BNC connector, supplied with safety 4 mm adapter
Output zero
  Manual adjust via thumbwheel
Cable length
  2 meters
Operating temperature range
  0 °C to +50 °C
Storage temperature range (with battery removed)
  -20 °C to +85 °C
Operating humidity
  15 % to 85 % (non-condensing)
Weight
  250 g
Safety standards
  BS EN 61010-1: 2001
  BS EN 61010-2-032: 2002
  BS EN 61010-031: 2002
  300 Vrms, Category III, Pollution Degree 2
  Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequencies below 1 kHz.
EMC Standards
  EN 61326: 1998 +A1, A2, & A3

 

Model Description
i30s AC/DC Current Clamp
Devamı...




Whatsapp Sipariş Hattı