Menu

Product image

Fluke i310s AC/DC Akım Pensi

Fiyatı: 37.666,26 TL KDV Dahil
İndirimli Fiyatı:   33.861,97 TL KDV Dahil

SKU:



Derecelendirme 0,00. Toplam oy 0.
The i310s current probe is based on Hall Effect technology for use in measurement of both DC and AC current.

The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

  • Current Ranges: 30 A and 300 A ACRMS or ±45 A and 450 A DC
  • Measuring Ranges: ±45 A and 450 A dc
  • Output Sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
  • Resolution: ±50 mA (40 A) to ±100 mA (400 A)
  • Load Impedance: > 10 k Ohms and £ 100 pF
  • Frequency Range (small signal): DC to 20 kHz (- 3 dB)
  • Phase Shift below 1 kHz, < 2 degrees
  • Temperature Coefficient: ±0.1% of reading / °C
  • Power Supply: 9 V Alkaline

 

Electrical Characteristics
Current Ranges
  30 A and 300 A ACRMS or ±45 A and 450 A DC
ACRMS or DC
  ±45 A and 450 A
Inrush Current
  600A ACRMS MAX
Output Sensitivity
  10 mV/A (30 A)
  1 mV/A (300 A)
Accuracy (at +23°C)
(30A range) ±1% of reading ±50 mA
(300A range) ±1% of reading ±300 mA
Bandwidth to meet accuracy specification
  1 kHz
Phase Shift below 1 kHz
  < 2 degrees
Resolution
  ±50 mA (30 A)
  ±100 mA (300 A)
Load Impedance
  > 10 k Ohms and ≤100 pF
Conductor Position Sensitivity
  ±1.5% relative to centre reading
Frequency Range
(small signal) DC to 20 kHz (- 3 dB)
Temperature Coefficient
  ±0.1% of reading / °C
Power Supply
  9 V Alkaline, MN1604/PP3
Battery Life
  30 Hours, low battery indicator
Working Voltage (see Safety Standards section)
  300 V ACRMS or DC

 

General Characteristics
Maximum Conductor Size
  19 mm diameter
Output Connection
  Safety BNC connector
  Supplied with safety 4mm adaptor
Output Zero
  Manual adjust via thumbwheel
Cable Length
  2 metres
Operating Temperature Range
  -10 to +50 °C
Storage Temperature Range (with battery removed)
  -20 to +85 °C
Operating Humidity
  15% to 85% (non-condensing)
Weight
  250 g

 

Safety Standards
BS EN 61010-1
  2001
BS EN 61010-2-032
  2002
BS EN 61010-031
  2002
300 VRMS, Category III, Pollution Degree 2
   
Note
  Use of the probe on un-insulated conductors is limited to 300 V ACRMS or DC and frequencies below 1 kHz.
EMC Standards
BS EN 61236 1998 +A1, A2, & A3

 

Model Name Description
i310s AC/DC CURRENT CLAMP
Devamı...




Whatsapp Sipariş Hattı